|
|
 |
|
 |
|
DORRIS TEF TROUGH ENDS 
 | Dorris TL gear drives with the D624 trough end adaptor will fit any Dorris trough end. | | When ordering Dorris trough ends, use the proper prefix and specify the conveyor diameter. | | For Dorris trough ends shown in this section, use the prefix TEF. | | Example: TEF-12 trough end, for a 12 inch "U" conveyor. | | The gear drive mounting dimensions are typical for all Dorris trough ends. | | Use the D624 Dorris trough end adaptor to mount TL gear drives to all Dorris trough ends. | | Bolt size and spacing conform to industry standards. The bolt pattern and dimensions shown are symmetrical. Bolt holes are round, not slotted. |
PART NO. | FORCONV.DIA. | DIMENSIONS IN INCHES | Weight
Lbs. | |
NO. HOLES | J | K | L | M | N | P | Q | R | TEF-6 | 6 | 6 | 21/32 | 4 1/16 | 2 1/32 | 4 1/8 | ---- | ---- | 7/16 | 4 7/16 | 9 | TEF-9 | 9 | 8 | 13/16 | 3 3/4 | 2 9/16 | 4 1/8 | ---- | 4 1/8 | 7/16 | 6 1/4 | 17 | TEF-12 | 12 | 8 | 15/16 | 4 1/16 | 3 7/8 | 5 5/16 | ---- | 5 3/16 | 9/16 | 7 15/16 | 26 | TEF-14 | 14 | 8 | 1 3/32 | 5 15/16 | 3 | 5 5/8 | ---- | 5 15/16 | 9/16 | 8 15/16 | 33 | TEF-16 | 16 | 8 | 1 5/8 | 6 5/8 | 3 3/4 | 6 3/8 | ---- | 6 5/8 | 11/16 | 10 | 40 | TEF-18 | 18 | 10 | 3 9/16 | 5 7/8 | 2 15/16 | 5 15/16 | 5 15/16 | ---- | 11/16 | 11 | 51 | TEF-20 | 20 | 10 | 4 15/32 | 6 11/16 | 3 11/32 | 6 1/4 | 6 11/16 | ---- | 11/16 | 12 3/16 | 61 | TEF-24 | 24 | 12 | 31/32 | 6 5/8 | 3 5/16 | 6 1/8 | 6 5/8 | 6 5/8 | 11/16 | 14 1/4 | 84 |
ADDITIONAL DORRIS TROUGH ENDS AVAILABLE | Consult the Dorris Company for dimensions of type FE, FL or TU trough ends. | | Bolt size and spacing of the type FE, FL and TU trough ends conform to industry standards. | | CEMA trough ends are also available. Consult Dorris Company for dimensions. |
Dorris Trough Ends (TEF)
|
|
 |
|
 |
| © 2008 SGC Industries, Inc. All Rights Reserved. |
This website designed and maintained by IGD Solutions Corporation |
|
|